$297 $158.49

/count/ sold in last /time/ hours.
Hurry, only 1236 item(s) left in stock!
10 visitors are looking this product!

Product Features:

100% Original Factory Manufacturer Produced,Good Quality Assurance!
Type:Blind Sport Monitoring System (BSM) Electricity Voltage: 12V Maximum Power: 5W (max)
Working Temperature:-40 degree +85 degree Storage Temperature:-40 degree +85 degree Waterproof
Level : IP67 Detection
Range: Lateral Distance: 0.3m - 4m
Rear side Distance: 0.3m-10m. Detection Range Accuracy:>96%
Alarm Range: 0.3m-10m System Alarm Accuracy:>96% Alarm
Method: 1 LED light turn on. Method 2 LED flash and buzzer sound

Note:


Special Version is not suitable for all cars , please provide photos of your car rear view mirror before purchase, we need to confirm whether your car rear view mirror is suitable for application.

Function Introduction:

This system is a vehicle assistance device that helps driver lane changing safely during driving. With the aid of 24GHz microwave sensor,probe the side / rear of the vehicle for those moving objects into the blind spot of the detection zone. The system works in a set of a control box (controlled by computer),two microwave sensors, two blind region monitor (or LED light),a buzzer and the wire harness which is the perfect connection of microwave and computer. There is blind zone at the rear of the vehicle which is easy to endanger driving safety! When you installed BSM into your lovely car, no matter it's day time, night time or even in the snow,you can be alerted whenever there is a moving object pop into the rear of the vehicle, with the aid of LED lighting on , blinking, buzzer sound so that the driver can be cautious when lane changing to avoid the possibility of side crash accident. When you get ready to get off,open the door,if someone moves behind,it will also give an accurate alarm. 

Note:

 

1.Please prepare necessary disassembly tool and protective bumper painted sponge pad or cloth pad.
2.When you disassemble connector, MUST NOT pull wire harness in force, otherwise, will broken the harness. Please plug in connector until it practically tightened (you can hear the sound of "Click").
3. The wire harness should be fixed with the car cable harness by tie band. Neither droop nor abnormal sound. Cut off excess tie band.
4. Disassemble and assemble procedure, please strictly follow our installation manual.Try not to break parts as careful as possible.In case of breakage,please change the parts immediately.
5. Microwave sensor installation cautions points. 1. Microwave sensor (signal launching surface) can only penetrate the plastic bumper case. 2. Microwave sensor (signal launching surface) in the front, must be no metal intervention.

Recently viewed

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
T
T.W.

It's a good product that I need.